Home › Makes › BMW › R 1200 GS › 2006
2006 BMW R 1200 GS recalls
NHTSA has 9 safety recall campaigns on record for the 2006 BMW R 1200 GS. Decode your VIN to confirm the exact vehicle.
Recall list
Fuel system, gasoline:delivery:fuel pump
NHTSA 20V471000August 10, 202016,926 units
Problem: BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running.
Risk: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: BMW will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began January 18, 2021. Owners may contact BMW customer service at 1-800-525-7417.
Wheels:lugs/nuts/bolts/studs
NHTSA 15V141000March 11, 201543,426 units
Problem: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.
Risk: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.
Remedy: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on May 7, 2015. Owners may contact BMW customer service at 1-800-525-7417.
Fuel system, gasoline:delivery:fuel pump
NHTSA 13V617000December 12, 201350,184 units
Problem: BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.
Risk: A fuel leak in the presence of an ignition source may result in a fire.
Remedy: BMW will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on April 16, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at [email protected].
Fuel system, gasoline:delivery:fuel pump
NHTSA 09V319000August 7, 20094,839 units
Problem: Bmw is recalling certain model year 2006 through 2008 r1200 gs motorcycles manufactured between august 2006 and january 2008. The sealing of the fuel pump control unit housing might be insufficient and water could intrude into the control unit housing creating a humid atmosphere. Under such conditions, the fuel pump could corrode and then fail.
Risk: Failure of the fuel pump will cause inadequate fuel to reach the engine and cause the engine to stop running. A loss of engine power without warning could increase the risk of a crash.
Remedy: Bmw will notify owners and replace the fuel pump control unit free of charge. The safety recall began on november 9, 2009. Owners may contact bmw at 1-800-831-1117.
Service brakes, hydraulic:foundation components:hoses, lines/piping, and fittings
NHTSA 08V254000June 5, 20084,922 units
Problem: Bmw is recalling 4,922 my 2007-2008 r1200r, my 2006-2007 r1200 gs, my 2007 r1200 st, and my 2008 r1200 gs adventure motorcycles. Due to the current routing of the front brake lines, it is possible that during riding, the brake lines could be under strain. If the vibration/strain is significant, the brake lines could split and start to develop a leak. If the leak became significant, brake fluid could escape. If this happened, the level of fluid in the reservoir of the front brake system could drop.
Risk: If fluid level drops significantly, the front brakes could fail increasing the risk of a crash.
Remedy: Dealers will inspect and install new brake lines with a modified routing free of charge. The recall began during august 2008. Owners may contact bmw at 1-800-831-1117.
Tires:valve
NHTSA 06V486000December 21, 2006144 units
Problem: On certain motorcycles, the tire inflation valve hole in the rim of the cross-spoke wheel which is equipped with the optional tire pressure monitoring system (tpm) was incorrectly manufactured. A leak may develop at this location possibly causing sudden deflation of the tire.
Risk: If this happened, motorcycle handling and control would be compromised, increasing the risk of a crash.
Remedy: Dealers will temporarily deactivate the tpm system, remove the corresponding valves and integral tpm sensors, and then replace them with standard valves. When a permanent repair is available, owners will be notified to bring their vehicles in for reactivation of the tpm system and replacement of the integral tpm sensors and valves. The recall began on january 12, 2007. Owners may contact bmw at 1-800-331-1117.
Service brakes, hydraulic:antilock/traction control/electronic limited slip
NHTSA 06V164000May 15, 200613,200 units
Problem: On certain motorcycles, under rapid, repeated, and unusually harsh braking, loss of abs capability could temporarily occur.
Risk: Temporary loss of abs braking could increase the risk of a crash.
Remedy: Dealers will add a physical restriction, in the form of a banjo bolt with a flow restrictor to the brake line, and on certain models dealers will install new front brake discs of a slightly larger thickness free of charge. The recall began on june 5, 2006, and will be a phased mailing through october 2006. Owners may contact bmw at 1-800-831-1117.
Service brakes, hydraulic
NHTSA 06V134000April 24, 20069,260 units
Problem: On certain motorcycles, if certain procedures are performed that involves removal of the front left brake caliper, the abs sensor cable can be routed incorrectly and when the caliper is reinstalled, the sensor cable can come into contact and rub against the front brake disc. Overtime, if the chafing becomes severe, it is possible to lose the abs function.
Risk: Loss of abs function could increase the risk of a crash during certain riding conditions.
Remedy: Dealers will attach additional retaining clips free of charge to the abs sensor cable, which will provide a more secure connection to the wheel carrier. The recall began on june 5, 2006, and will be a phased mailing through october 2006. Owners may contact bmw at 1-800-831-1117.
Power train:clutch assembly
NHTSA 06V104000April 4, 2006453 units
Problem: On certain motorcycles, the clutch components could become loose while the motorcycle is being operated.
Risk: If this happened, the components could exit through the engine casting increasing the risk of a crash.
Remedy: Dealers will install new clutch components free of charge. All motorcycles are located at dealers. No motorcycles have been sold to customers.
Source: NHTSA recall database. A recall applies to vehicles built in a specific date range; check your VIN at nhtsa.gov/recalls.
← 2005 R 1200 GS 2007 R 1200 GS →
Questions
How many recalls does the 2006 BMW R 1200 GS have?
NHTSA records list 9 safety recall campaigns for the 2006 BMW R 1200 GS.
How do I know if my 2006 BMW R 1200 GS has an open recall?
Enter your VIN on NHTSA.gov's recall lookup (nhtsa.gov/recalls). It shows unrepaired recalls for your exact vehicle. Recall repairs are free at authorized dealers.